How to Properly Remove Old EVA Boat Flooring？

Removing old EVA boat flooring is a task that requires careful attention and skill, but with the right steps and tools, the process can be much smoother. In this article, we will provide detailed steps and professional advice to help you easily accomplish this task and prepare for the installation of brand new boat flooring.

Step 1: Prepare Tools and Materials

Before starting the removal work, make sure you have the following tools and materials ready:
Flathead screwdriver or scraper: for removing the flooring piece by piece. Heat gun or hairdryer: for softening the adhesive on the flooring.
Cleaning agent: recommended options include acetone, vinegar, or professional floor cleaners to thoroughly remove residual adhesive and dirt.
Cloth or sponge: for wiping and cleaning the surface of the flooring.

Step 2: Soften the Adhesive

Use a heat gun or hairdryer to blow hot air directly onto the surface of the flooring, especially at the seams and adhesive areas. The heat will soften the adhesive, making it easier to remove. Ensure that you evenly apply heat to every part of the flooring and avoid overheating to prevent damage to the flooring or boat surface.

Step 3: Remove Piece by Piece

Using a flathead screwdriver or scraper, start removing the flooring piece by piece from the edge. Insert the tool under the edge of the flooring and gently push upwards until the flooring is completely detached. If you encounter stubborn areas, try applying some cleaning agent and let it penetrate underneath the flooring to help loosen the adhesive.

Step 4: Clean the Flooring Surface

After removing the flooring, thoroughly clean the surface with the cleaning agent and cloth or sponge. For stubborn dirt or residual adhesive, you may need to wipe multiple times until the surface is completely clean. Ensure good ventilation during the cleaning process and strictly follow the instructions for using the cleaning agent.

Choosing the right cleaning agent is crucial. Acetone and vinegar are common DIY cleaning agents that can effectively remove residual adhesive, but be sure to avoid using solvent-based cleaners to prevent damage to the flooring material. Exercise caution during the removal process to avoid damaging the boat surface or other components around the flooring. If you encounter difficulties or are unsure how to proceed, seek professional help to ensure safe and effective completion of the task. By following the above steps and professional advice, you can easily and safely remove old EVA boat flooring and prepare for the installation of new flooring.

KT GuoMei is a direct factory, established in 2006，over the years, we have continuously innovated, improved production technology and accumulated experience in the production industry of EVA foam Marine products.

For more detailed information, please contact us, we will reply you as soon as possible.

Website: ktguomei.com
Email: sales@ktguomei.com